Industry News

How much should I do with a lot of residual toner stuck on the fuser roller of the copier?

How much should I do with a lot of residual toner stuck on the fuser roller of the copier?

The fuser roller of the copier (depending on the paper inlet and outlet, It's hotter after the copy) has stuck the residual carbon powder. What should I do?
This situation is more common, especially in a large batch of copies. Usually in this situation spot is relatively large, and might spot paper wear. Then in the case of copier heating engine , copy a few sheets of paper first, and then  open the copier cover , raise the fuser unit slightly , you will see some parts of the fuser roller will stick with something, wipe the toner on the fuser roller with cotton balls, pay attention not to use wet material when wiping, because the fuser roller temperature is very high, with a wet wipe things may damage it, also can not wipe the cooler, because when cooler the toner will stick firmly, can not wipe it off, if push too hard, will break the black film of fuser roller.
QQ
WhatsApp 008618620149020